Metal Bed Rails – Mounting a modern double bed with rails can usually be carried out by a person in less than an hour. Essentially the two lanes are aligned on the floor where the bed will be placed, then joined in the middle. The headboard and footboard are joined, and the mattress and mattress are fixed in place. Often, the bed is mounted with hand screws, which eliminates the need for tools.
Turn off the part of the room in which the bed is placed. Inspect the lanes to identify the left and right. Place the rails on the ground so the support part with slatted rails faces each other, parallel and a few feet apart. Locate the “steel” buttons “and” corresponding lock eyes in the center bed supports. Insert the button of a center rail into the corresponding keyhole in the opposite center rail.
Fix the headboard to the rails by placing the first of the headboard at the head of the bed and the alignment of the holes previously drilled in the plates of the ends of the rails to those of the legs of the headboard. Thread the thumbscrew through the holes so that the wing nut is against the inside of the rail endplate. Tighten the wing nuts and repeat to place the other section of the head of the bed to the opposite side. Place the box spring on the support rails on the frame of the mounted bed.
12 Build Double Bed With Metal Bed Rails Photos